[Chevelle-list] hood springs

[Cross, William]

Thanks DAN

Hood is fine, but I bent the left hinge. It didn't want to move after 35 years.
I bought a replacement hinge and spring, but now I have to "play" with the spring :( I was hoping for a trick or two.

Bill

________________________________
From: chevelle-list-bounces at chevelles.net [mailto:chevelle-list-bounces at chevelles.net] On Behalf Of Dan Rachlin
Sent: Thursday, July 03, 2008 2:55 PM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] hood springs

I just put one side on and used a prybar (VERY CAREFULLY!!) to stretch it over the end. I wouldnt try to straighten an old one. depending on how its bent. Check your hood too, maybe the understructure is crushed?
Dan
On Thu, Jul 3, 2008 at 2:49 PM, Cross, William <william.cross at yale.edu<mailto:william.cross at yale.edu>> wrote:

Has anyone had experience with the installation of new hood springs? How do you stretch them out safely.



Or does anyone know if you can straighten out an original hood support?



Bill C



70 LS6

70 402

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20080703/03795655/attachment.html