[Chevelle-list] master cylinder bench bleeding

[bad66chevelle454 at aol.com]

I always take extra line, screw them into the master cylinder, then bend them up and into the reservoir, so that the ends of these lines are submerged in the reservoir. Fill up the master cylinder with fluid, making sure the ends of the lines are submerged. Put the master cylinder in a vise, and push on the piston part of it with a screwdriver. You'll see bubbles come out from the lines...keep going and going and going and going(haha) untill no more air comes out. You could do this on the car also...which is what I did. That way you can just step on the brake pedal. But then you'd need somebody else to tell you when the bubbles stop. 



Pretty easy to do really. If you have any more questions just ask. 


-----Original Message-----
From: ss454hillman at aol.com
To: chevelle-list at chevelles.net
Sent: Thu, 28 Feb 2008 6:10 am
Subject: [Chevelle-list] master cylinder bench bleeding



Hi guys I had to replace a master cylinder on the 70 and I got the one with no bleeders on it. What is the process to properly bench bleed it?? Thanks? Steve
Supercharge your AIM. Get the AIM toolbar for your browser. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20080228/979c0865/attachment.html