[Chevelle-list] E Brake

[Jim Buckingham]

I just picked up a 1/8 inch ss rod (free from my local welder).  I will bend
it up tonight should work just fine.

Jim

-----Original Message-----
From: chevelle-list-bounces at chevelles.net
[mailto:chevelle-list-bounces at chevelles.net] On Behalf Of John Nasta
Sent: Tuesday, September 18, 2007 2:03 PM
To: chevelle-list at chevelles.net
Subject: Re: [Chevelle-list] E Brake

I'm not a metallurgist, but it seems to me like if you heated it up  
and used a bending jig, it would bend ok. Inline tube sells them in  
stainless or "OEM", which I guess are steel but not stainless. They  
must be bending them somehow. The OEM ones are $5 for small or $7 for  
large. The SS ones are $5 for small and $15 for large.

I need one for my El Camino too but unfortunately it's pretty low on  
the priority list right now.



Quoting Dave Corgill <dobedav at swbell.net>:

> At 12:16 PM 9/18/2007, you wrote:
>
>> Thre is an idea.  wonder if you can bend it though with out it breaking.
>>
>> jim
>
> I just used some 1/8" SS rod Stainless Steel = SS.