[Chevelle-list] speaking of starters

[Dale]

I haven't seen a M.A.D. diagram but the photo on their site of the ST-1
"START'M UP" kit shows the metal jumper just like the one from Summit.
http://www.madelectrical.com/images/st-1.s4.jpg.  I'd also bet the metal
jumper probably comes from one supplier and that Summit's kit and M.A.D.'s
kit use the same jumper.

I'd surmise that M.A.D. probably discovered the metal jumper worked better
(or easier) than a wire jumper but maybe didn't change the instructions on
paper - and I still can't find an instruction sheet on their site for the
ST-1 kit.

Dale


-----Original Message-----
From: chevelle-list-bounces at chevelles.net
[mailto:chevelle-list-bounces at chevelles.net] On Behalf Of John Nasta
Sent: Wednesday, October 31, 2007 9:29 AM
To: chevelle-list at chevelles.net
Subject: Re: [Chevelle-list] speaking of starters

I see now that it's the MAD diagram that specifies 12 gauge wire 
between BAT & S, but Summit's kit is shown w/ the bracket.

I'm not sure what the advantage(s) of the 30A relay setup is/are.

I am going to try to do this w/ the 12 gauge wire. Hopefully today.


Quoting Dale <396guy at lcisp.com>:

> http://www.chevellestuff.com/tech/ford_solenoid.htm has diagrams for
wiring
> the Summit/M.A.D. way along with a photo showing Summit's kit (item
> #SUM-G1750).  If you go to the Summit site and search for SUM-G1750,
you'll
> find it.  There's also a diagram for using a standard 30A relay if you
don't
> like the solenoid idea.
>
>
>
> Dale McIntosh
>
>  <http://www.chevellecd.com> ChevelleCD.com
>
> ChevelleStuff.com <http://www.chevellestuff.com>
>
>  <http://www.chevellecd.com>
>
>
>
>   _____
>
> From: chevelle-list-bounces at chevelles.net
> [mailto:chevelle-list-bounces at chevelles.net] On Behalf Of
HarKemAsso at aol.com
> Sent: Monday, October 29, 2007 3:36 AM
> To: Chevelle-list at chevelles.net
> Subject: [Chevelle-list] speaking of starters
>
>
>
> Awhile back it was said to add a relay to the ignition switch,(for a mini
> starter clicking problem) does anyone have a wire diagram for this mod??
and
> will any relay work?
>
> thanks
> Harlan
>
>
> http://hometown.aol.com/harkem123/HarlanKemperAssociatesindex.html
>
>
> **************************************
> See what's new at http://www.aol.com
>
>
>
>   _____
>
> avast! Antivirus <http://www.avast.com> : Outbound message clean.
>
>
> Virus Database (VPS): 071028-0, 10/28/2007
> Tested on: 10/29/2007 8:44:39 AM
> avast! - copyright (c) 1988-2007 ALWIL Software.
>
>
>








  _____  

avast! Antivirus <http://www.avast.com> : Outbound message clean. 


Virus Database (VPS): 071031-0, 10/31/2007
Tested on: 10/31/2007 10:48:32 AM
avast! - copyright (c) 1988-2007 ALWIL Software.