[Chevelle-list] Banjo Fitting

[tech]

I know Aeroquip makes straight banjo to hose adapters, here's one from Summit:
"http://store.summitracing.com/egnsearch.asp?Ntt=banjo&N=700+4294924496+4294839052+115+300072&autoview=sku&Ntk=KeywordSearch"

I have a few more sources to check. Is the thread "coarse" or "fine", M12 x 1.75 or M12 x 1.25?  I'll let you know if I find one but it would be from a hydraulic supplier...  FYI: A fitting designed for brakes will be able to withstand high pressures (2000 PSI) a fuel fitting will be light weight due to less pressure (15 PSI). You can substitute a hydraulic fitting and open up the internal passage to allow more flow.


G r a n i t e   C i t y   P e r f o r m a n c e
custom engineered competition components

---- Rick Schaefer <rickas at gmail.com> wrote: 

=============
     I need a banjo fitting for the electric fuel pump on my el
camino.   And can't find one that has a 3/8" barbed output.   The pump has a
12 mm output.    This is similar to what I need but it is for brakes :
http://cgi.ebay.com/ebaymotors/Harley-Chrome-12MM-90-Degree-Male-Banjo-Brake-Fitting_W0QQcmdZViewItemQQcategoryZ35569QQihZ020QQitemZ300155303285QQrdZ1QQsspagenameZWDVW

I could use a straight output but with limited space the elbow is better.
Now I am using the 5/16 barbed fitting that came with the pump but would
like to upgrade to 3/8 hose.    Can anyone point me in the right direction?

-- 
Rick Schaefer
72 TPI El Camino