[Chevelle-list] speaking of starters

[Malibu]

John had said "I'm not sure what the advantage(s) of the 30A relay setup 
is/are." This site will help explain it and show you how to install one. 
It's a VW bus they're talking about but it will work on a Chevy starter.

http://www.type2.com/bartnik/relay.htm
----- Original Message ----- 
From: "Dale" <396guy at lcisp.com>
To: "'The Chevelle Mailing List'" <chevelle-list at chevelles.net>
Sent: Wednesday, October 31, 2007 11:49 AM
Subject: Re: [Chevelle-list] speaking of starters


>I haven't seen a M.A.D. diagram but the photo on their site of the ST-1
> "START'M UP" kit shows the metal jumper just like the one from Summit.
> http://www.madelectrical.com/images/st-1.s4.jpg.  I'd also bet the metal
> jumper probably comes from one supplier and that Summit's kit and M.A.D.'s
> kit use the same jumper.
>
> I'd surmise that M.A.D. probably discovered the metal jumper worked better
> (or easier) than a wire jumper but maybe didn't change the instructions on
> paper - and I still can't find an instruction sheet on their site for the
> ST-1 kit.
>
> Dale
>
>
> -----Original Message-----
> From: chevelle-list-bounces at chevelles.net
> [mailto:chevelle-list-bounces at chevelles.net] On Behalf Of John Nasta
> Sent: Wednesday, October 31, 2007 9:29 AM
> To: chevelle-list at chevelles.net
> Subject: Re: [Chevelle-list] speaking of starters
>
> I see now that it's the MAD diagram that specifies 12 gauge wire
> between BAT & S, but Summit's kit is shown w/ the bracket.
>
> >
> I am going to try to do this w/ the 12 gauge wire. Hopefully today.
>
>
> Quoting Dale <396guy at lcisp.com>:
>
>> http://www.chevellestuff.com/tech/ford_solenoid.htm has diagrams for
> wiring
>> the Summit/M.A.D. way along with a photo showing Summit's kit (item
>> #SUM-G1750).  If you go to the Summit site and search for SUM-G1750,
> you'll
>> find it.  There's also a diagram for using a standard 30A relay if you
> don't
>> like the solenoid idea.
>>
>>
>>
>> Dale McIntosh
>>
>>  <http://www.chevellecd.com> ChevelleCD.com
>>
>> ChevelleStuff.com <http://www.chevellestuff.com>
>>
>>  <http://www.chevellecd.com>
>>
>>
>>
>>   _____
>>
>> From: chevelle-list-bounces at chevelles.net
>> [mailto:chevelle-list-bounces at chevelles.net] On Behalf Of
> HarKemAsso at aol.com
>> Sent: Monday, October 29, 2007 3:36 AM
>> To: Chevelle-list at chevelles.net
>> Subject: [Chevelle-list] speaking of starters
>>
>>
>>
>> Awhile back it was said to add a relay to the ignition switch,(for a mini
>> starter clicking problem) does anyone have a wire diagram for this mod??
> and
>> will any relay work?
>>
>> thanks
>> Harlan
>>
>>
>> http://hometown.aol.com/harkem123/HarlanKemperAssociatesindex.html
>>
>>
>> **************************************
>> See what's new at http://www.aol.com
>>
>>
>>
>>   _____
>>
>> avast! Antivirus <http://www.avast.com> : Outbound message clean.
>>
>>
>> Virus Database (VPS): 071028-0, 10/28/2007
>> Tested on: 10/29/2007 8:44:39 AM
>> avast! - copyright (c) 1988-2007 ALWIL Software.
>>
>>
>>
>
>
>
>
>
>
>
>
>  _____
>
> avast! Antivirus <http://www.avast.com> : Outbound message clean.
>
>
> Virus Database (VPS): 071031-0, 10/31/2007
> Tested on: 10/31/2007 10:48:32 AM
> avast! - copyright (c) 1988-2007 ALWIL Software.
>
>
>
>