[Chevelle-list] Engine noise!

Pelle Andersson chevellegearheads at hotmail.com
Tue May 22 15:49:15 MDT 2007


I'm going to rebuild the engine!
Check the links & you'll see what I mean!
Sorry for not being clear, I just assumed everyone knew ;-)
I've discussed this matter back and forth at another Swedish forum &
mixed it up!

http://farm1.static.flickr.com/231/504408105_ec9665fc5c_b.jpg
http://farm1.static.flickr.com/204/503491365_5ef7b38c80_b.jpg

Best regards Pelle


>From: John Nasta <69ec at johnnasta.com>
>Reply-To: The Chevelle Mailing List <chevelle-list at chevelles.net>
>To: chevelle-list at chevelles.net
>Subject: Re: [Chevelle-list] Engine noise!
>Date: Tue, 22 May 2007 17:39:33 -0400
>
>Unfortunately you should not have taken the heads off. You should have  
>tried draining a pint of oil and replacing it with a high-detergent  oil 
>(like Marvel Mystery Oil or transmission fluid) for 100 miles or  so and 
>then changing the oil and adjusting the valves. You probably  could have 
>gotten the tap out and you would have been driving again in  no time.
>
>What makes you thing it's a worn cam rather than a bad lifter?
>
>Even if it is a worn cam, why would you have the block machined? You  have 
>to take the intake manifold off to replace the cam and/or  lifters, not the 
>heads.
>
>Sorry, but none of what you wrote makes a whole lot of sense to me. I  
>don't know the whole story but it sounds like you made things go from  bad 
>to worse.
>
>
>Quoting Pelle Andersson <chevellegearheads at hotmail.com>:
>
>>Now I know what it was!
>>A worn down lobe on the cam (#8)
>>I removed the heads just to check and found out that #8 had problems.
>>I have to leave the block for some machining :-(
>>
>>No driving this summer :-/
>>
>>http://www.flickr.com/photos/pellechevelle/sets/72157600027680861/
>>
>>Pelle
>>   ----- Original Message -----
>>   From: Pelle Andersson
>>   To: The Chevelle Mailing List
>>   Sent: Friday, May 11, 2007 4:29 PM
>>   Subject: Re: [Chevelle-list] Engine noise!
>>
>>
>>   A sticky lifter could explain why it's running colder on #8!?
>>   Maybe we're on to something here :-)
>>
>>   Pelle
>>     ----- Original Message -----
>>     From: Carl Ziegler
>>     To: The Chevelle Mailing List
>>     Sent: Friday, May 11, 2007 1:38 PM
>>     Subject: Re: [Chevelle-list] Engine noise!
>>
>>
>>     Sounds like either an exhaust leak or a sticky lifter to me.  My $.02
>>
>>
>>     ----- Original Message ----
>>     From: Pelle Andersson <chevellegearheads at hotmail.com>
>>     To: The Chevelle Mailing List <chevelle-list at chevelles.net>
>>     Sent: Friday, May 11, 2007 6:18:47 AM
>>     Subject: [Chevelle-list] Engine noise!
>>
>>
>>     Hi!
>>
>>
>>
>>     I have this strange noise during acceleration!
>>
>>     Sounds a little bit like a bolt tapping my M/T aluminum valve   
>>covers but a tad sharper!
>>
>>     No marks in the valve covers indicating that anything is hitting 
>>them!
>>
>>     I've tried to adjust timing back & forth 16-8 degrees but it's   
>>still the same!
>>
>>     It's in sync with the rpm & I can only hear it when accelerating 
>>hard!
>>
>>
>>
>>     Any ideas?
>>
>>     Pelle
>>
>>
>>
>>
>>
>>----------------------------------------------------------------------------
>>     We won't tell. Get more on shows you hate to love
>>     (and love to hate): Yahoo! TV's Guilty Pleasures list.
>
>
>

_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar - get it now! 
http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/




More information about the Chevelle-list mailing list