[Chevelle-list] Copy your 402?

[Daniel Solomon]

Thanks Brad. I sent you my specs off list. Let me know if i missed anything.Thanks,Dan Solomon For those out there that won't stand behind our Troops...They are always welcome to stand in front of them! http://www.freewebs.com/chevelles1970/

> From: brad at epage.com> To: chevelle-list at chevelles.net> Date: Fri, 29 Jun 2007 11:31:45 -0700> Subject: Re: [Chevelle-list] Copy your 402?> > Sure, send me data and I'll run what I can. Same goes for anyone else, but> if I get a ton of requests it might be slow. I do have some work to get> done today before taking people out to wait in line for their iPhone.> > Brad Waller (brad at epage.com)> > '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1> '67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | 275/40/17 Kumho MX > > > -----Original Message-----> > From: chevelle-list-bounces at chevelles.net > > [mailto:chevelle-list-bounces at chevelles.net] On Behalf Of > > Rozanski Joe (GS/EMP4-NA)> > Sent: Friday, June 29, 2007 10:19 AM> > To: The Chevelle Mailing List> > Subject: Re: [Chevelle-list] Copy your 402?> > > > Hey Brad,> > If your interested, I would like you to run some numbers on a > > my wicked> > 540...> > Thanks> > joe > > > > -----Original Message-----> > From: chevelle-list-bounces at chevelles.net> > [mailto:chevelle-list-bounces at chevelles.net] On Behalf Of Brad Waller> > Sent: Friday, June 29, 2007 12:54 PM> > To: 'The Chevelle Mailing List'> > Subject: Re: [Chevelle-list] Copy your 402?> > > > Pelle,> > > > Which heads do you have? I can run a Dyno2000 simulation with your> > setup> > and get some guesses. Give me a "parts list" of the engine builds you> > are> > thinking of. If you have Cam specs or the actual cam name I > > might have> > them> > stored already. I took some guesses as to components and > > came up with a> > 425> > HP combo off the bat. I used what you gave me and assumed Edelbrock> > Performer heads and a high performance hydraulic lifter cam. The> > program> > assumed lifts of .504/.479 and the engine is guessed to have 424HP at> > 5500> > RPM, but torque starts at 411 at 2000 RPM, peaks at 450 at > > 4000 RPM, and> > drops to 366 by 6000 RPM.> > > > Not an actual engine to copy, but at least it gives you an > > idea what you> > can> > look into.> > > > The only 402 file I have is from an engine with a roller cam. > > It has GM> > Rectangular port "188" heads, a 850 CFM carb with a dual plane intake,> > small> > tube headers, and Comp XR282HR cam. Numbers are:> > > > RPM HP TQ> > 2000 168 442> > 2500 218 457> > 3000 268 469> > 3500 322 484> > 4000 371 487> > 4500 413 481> > 5000 436 458> > 5500 432 412> > 6000 410 359> > > > Brad Waller (brad at epage.com)> > > > '66 Corvette | 327/dead | 4-speed | Wilwood Brakes | 245/45/16 BFG R1> > '67 Chevelle | ex-SS396 | 355/700R4 | F-Body Brakes | > > 275/40/17 Kumho MX> > > > ________________________________> > > > From: chevelle-list-bounces at chevelles.net> > [mailto:chevelle-list-bounces at chevelles.net] On Behalf Of Pelle> > Andersson> > Sent: Friday, June 29, 2007 8:35 AM> > To: The Chevelle Mailing List> > Subject: [Chevelle-list] Copy your 402?> > > > > > Does anyone have a 402 (.060 over) 2-bolt main with approx> > 400-500> > hp> > which i can copy?> > > > I'm asking because when i get my block back from the machine> > shop> > I'd like to get "bolt on" hp without too much> > hassle/experimentation.> > > > Im planning to raise the comp to 10:1(new pistons), keep the> > original heads, my> > 800 cfm Holley, my Hooker headers with 2'' primarys and my> > Edelbrock> > RPM performance Intake.> > > > I know i've been pestering you guys with this before but I still> > need some ideas/input/advice!> > > > > > Best regards> > Pelle> > ______________________________> > Chevelle gearheads> > http://hem.bredband.net/chevellegearheads/> > http://www.chevelleforum.se/> > > > > > > > > > > > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20070630/02d97eb2/attachment.html