[Chevelle-list] Windshield install clips etc.

[Mike Holleman]

Chuck, Be sure to install your clips before the windshield is in place. I 
use Butyl rubber tape. It is available at most good parts stores. Use either 
3/8" or 5/16". If you have never done this before get some help. It is hard 
to describe the process in an email. Check the team chevelle achieves for WS 
installation instructions.
Mike
----- Original Message ----- 
From: "Chuck Kranz" <malibu65 at wa7oef.net>
To: "The Chevelle Mailing List" <chevelle-list at chevelles.net>
Sent: Wednesday, June 13, 2007 2:10 PM
Subject: [Chevelle-list] Windshield install clips etc.


> howardholland wrote:
>> Its not a problem,just make sure you install new clips to hold down the 
>> trim,if the old ones are bad.
>>
>> The real fun starts is when you put the trim back on and you have new 
>> paint to deal with..............opps
>>
>> I scratch my new paint.......................Have at it.
>>
>> Howard
>
> Where is a good source for clips and installation sealer? (if you call it 
> that) I believe the clips are placed around the windshield and the sealer 
> is applied to the body. Then the glass is carefully installed. Anyone do 
> this often enough to give advice?
> Thanks,
> Chuck K.
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 
> 269.8.15/847 - Release Date: 6/12/2007 9:42 PM
>
>