[Chevelle-list] Wheel hop.

[Dale]

Edelbrock and Lakewood are two companies that make NO-HOP bars for 64-72
A-bodies.  May be others but these two come to mind.  Here's a thread on
them at TC - http://www.chevelles.com/forums/showthread.php?t=96660


Dale McIntosh
1966/67 Chevelle Reference CDs
ChevelleStuff.com


-----Original Message-----
From: chevelle-list-bounces at chevelles.net
[mailto:chevelle-list-bounces at chevelles.net] On Behalf Of Jim & Chris
Sent: Tuesday, July 10, 2007 10:59 AM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] Wheel hop.

sounds like a cool set-up  but if your shoppin online your going to be
looking for ladder bars ( coil springs ). Good luck. Jimmy C.
----- Original Message -----
From: "dgage" <dgage at wyoming.com>
To: <chevelle-list at chevelles.net>
Sent: Monday, July 09, 2007 11:40 PM
Subject: [Chevelle-list] Wheel hop.


>I just installed a Tremec 5 speed into my 68 SS. I switched
> from a TH 400. The problem That I have now is bad wheel hop.
> I never had it with the 400. I have boxed my lower control
> arms and installed urethane bushings. Plus I have airlift
> drag bags in my coils and Monroe coil shocks. I'm thinking
> that I might have to get a set of traction bars,but I don't
> want to loose the stock look. Have any of you guys used
> traction bars or adjustable upper control arms to fix a
> problem like this? The only thing that I can think of, that
> might have changed in this switch over is the pinion angle.
> Thanks ahead of time for any help....Dennis
>
>






  _____  

avast! Antivirus <http://www.avast.com> : Outbound message clean. 


Virus Database (VPS): 000755-0, 07/09/2007
Tested on: 7/10/2007 11:31:26 AM
avast! - copyright (c) 1988-2007 ALWIL Software.