[Chevelle-list] New 1 here !

Pelle Andersson chevellegearheads at hotmail.com
Mon Feb 5 10:48:44 MST 2007


Welcome!

-Pelle

----- Original Message ----- 
From: "Cerberus Kelpie" <valcaldera at msn.com>
To: <Chevelle-list at chevelles.net>
Sent: Saturday, February 03, 2007 10:38 PM
Subject: [Chevelle-list] New 1 here !


> Hellew ALL,
>
>>I'm NOT the owner of a '64 El Camino yet I DO most of the work on it or 
>>have it done, so in essence I am partly an owner. I ain't comfortably 
>>"well off", I'm jest comfortably off. I prefer to do a lot of the 
>>resto-ing meself, yet w/out an adequate covering, I am resigned to paying 
>>some folk to perform these exercises. I'm currently in the process of 
>>acquiring the parts I wanna replace and this process alone is 
>>comparitively insurmountable yet necessary for Elkys longevity.
> We live in Greensboro, NC, which is being generated into Brownsville with 
> all the building and roads construction. ANYONE here live near or within 
> 50 miles? ANYONE here that can recommend a good shop for overall repairs 
> to a '64??
>>It has the factory 327 punched up a wee bit (.030) back in '02, so I guess 
>>it's what, a 331?!
> Factory Rochester 4-jet(not the Quad) and (till further notice) Factory 
> Intake manifold.
> We had the Aluminum Powerglide completely overhauled by Cottman Trans. 
> back(of course not forward) in '04 or '05.
> Also has the Lmtd. slip or Posi deal. Unsure of the gearing ratio.
> It has ruffly 70,000 young miles for a 46 year old. I have more miles than 
> Elky does yet I'm so far, more agile.
>>Sadly for us, we live in a Condo w/out coverage for Elky, so wurkin' on it 
>>is a pain in the open parking lot. Grit in bearings and otter places woiks 
>>very well for REbuilders, so I'm DONE working on it here.
> Elky currently has a Carb anomaly where when cranking it will catch and 
> quit, repeatedly until it will catch and run a bit then quit. It's VERY 
> aggravating to both Elky and me. When it does finally get running, it'll 
> quit when initiated, introduced, or engaged into ANY gear. So far the 
> starter is still very operational.
>
> I've bin accused of being loquacious by my wife which can explain the 
> length of this post.
> I'll try to be less lengthy on/in future posts, however who knows.
>
> Thank You ALL (seperately) for Your Time!!
> ~EGuvNC~  .)
>
> I've bin reading all the e-mails that were sent since Feb 1 and I've the 
> "daily digest" setting set.
>
> I really dig that post about "how to properly UNsubscribe" frum the 
> Chevelles mailing list, so much so that I copy-n-pasted it to meself and a 
> coupla fiends.
> I like folk that are just crazy enuf to be comically creative yet holding 
> what there is of their sanity in check for other purposes as necessary, 
> when applicable.
>
> I believe I've "found" a neat list to be a part of and I dig ALL sarcasm 
> whether or not intended as SARCASM DENOTES INTELLIGENCE!! Let the games 
> continue!
>
> WELCOME BACK MITCH!!, even tho I wasn't here when ya split the scene.
>
> I read one e-mail that was "talking" about a front end rebuild site for 
> Chevelles and I wood lyk that link if it is still valid, thank you!
> At Team Chevelle there is the Archives section that has details for the 
> rebuilding of the Lower Control Arms, however NOTHING for the Upper 
> Control Arms, hmmm.
>
> _________________________________________________________________
> FREE online classifieds from Windows Live Expo - buy and sell with people 
> you know 
> http://clk.atdmt.com/MSN/go/msnnkwex0010000001msn/direct/01/?href=http://expo.live.com?s_cid=Hotmail_tagline_12/06
>
>
> 




More information about the Chevelle-list mailing list