[Chevelle-list] 64 Chevelle wiper question

[John Biddle]

Check the linkage.  Paint may have jammed them up when they painted the cowl.  It would spray right in if the did not remove the cown piece to paint it.
  ----- Original Message ----- 
  From: Daniel De Smet 
  To: The Chevelle Mailing List 
  Sent: Sunday, December 02, 2007 12:50 PM
  Subject: [Chevelle-list] 64 Chevelle wiper question



  I just got my car back from paint and body.  Now my wipers do not work.  I have checked out at the wiper motor and I have 12 volts and when I turn the wiper switch it provides the ground at the motor. So I have power and ground at the motor.  I also checked the wiper motor body to ground and it has a good ground to the body.  I cleaned the body ground just to make sure.  I assumed since I have 12 volts and a ground that switches with the wiper switch that I must have a bad wiper motor.  I purchased a new wiper motor and installed it.  I checked the wiper linkage when the motor was off and it moved freely.  Now that the new wiper motor is installed I still do not have working wipers.
   
  Does any one have any ideas?  I am wondering if I just got a bad motor.  I would not think that a two wire system would be that hard to diagnose but it is really beginning to annoy me plus I lost my schematic book so I am just tracing wires.


------------------------------------------------------------------------------
  Share life as it happens with the new Windows Live. Share now! 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20071202/3157375b/attachment.html