[Chevelle-list] Trimming the framerail, what cutter?

[Josh Egler]

exactly, if you need one almost every parts house would have one

and it beats spending $1000 for a custom tank with a intank pump or using a
external pump.  Might as well use what I already have

Josh



On 8/28/07, Dale <396guy at lcisp.com> wrote:
>
>  Makes sense – let's you use a stock-type item like the fuel pump that may
> not as hard to find a replacement for as an aftermarket specialty item.
>
>
>
> Dale <http://www.chevellecd.com>
>
>
>   ------------------------------
>
> *From:* chevelle-list-bounces at chevelles.net [mailto:
> chevelle-list-bounces at chevelles.net] *On Behalf Of *Josh Egler
> *Sent:* Tuesday, August 28, 2007 2:41 PM
> *To:* The Chevelle Mailing List
> *Subject:* Re: [Chevelle-list] Trimming the framerail, what cutter?
>
>
>
> I am installing a lt1 out of the caprice, so just to simplify things I
> used the Caprice tank, which already has an intank fuel pump
>
>
>  On 8/28/07, *Rick Schaefer *<rickas at gmail.com> wrote:
>
>   What advantage does the Caprice tank offer?   In-tank pump?
>
>
>
> On 8/28/07, *Josh Egler* <jbegler at gmail.com> wrote:
>
> I agree totally, a plasma cutter will make this only a few minute job.  I
> also installed a tank from a 95 Caprice
>
> Josh
>
>
>
> On 8/28/07, *Dan at Earthlink* < danmcintosh at earthlink.net > wrote:
>
> If you have access to a plasma cutter, by all means, use that.  If you do
> not, then use a cut off wheel on a 4 1/2" grinder.  Wear goggles!
>
>
>
> Dan McIntosh
> Street Metal Fabrications
> http://www.lowriderimpala.com
>
>
>
>
>
>  ----- Original Message -----
>
> *From:* the.cat at codding.org
>
> *To:* The Chevelle Mailing List <chevelle-list at chevelles.net>
>
> *Sent:* Monday, August 27, 2007 11:29 PM
>
> *Subject:* [Chevelle-list] Trimming the framerail, what cutter?
>
>
>
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hiya,
>
> I'm installing a fuel tank from a 95 Caprice as part of my engine swap,
> and I need to cut 3/4" off each lower framerail to do it. What's the
> best tool to use?
>
> Dave.
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.4 (Darwin)
>
> iD8DBQFG05ajrFe9ZwWo2/kRAudaAJ9wYwctQa6+qA3lLofEbCU6RRvHmgCfZdmg
> vcbaNEU/eGb9TiUYfcsVrkw=
> =RHEZ
> -----END PGP SIGNATURE-----
>
>
>
>  --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.484 / Virus Database: 269.12.9/975 - Release Date: 8/26/2007
> 9:34 PM
>
>
>
>
>
>
>
>  --
> Rick Schaefer
> 72 TPI El Camino
>
>
>
>
> ------------------------------
>
> avast! Antivirus <http://www.avast.com>: Outbound message clean.
>
> Virus Database (VPS): 000769-1, 08/28/2007
> Tested on: 8/28/2007 2:47:50 PM
> avast! - copyright (c) 1988-2007 ALWIL Software.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20070828/b0752222/attachment.html