[Chevelle-list] Vacum

[Brad Waller]

I had just about the same thing happen to me.  My push rod was just 
bent, not broken.  The heads needed a servicing, which would have cost 
about as much as new heads, so I bought a set of World S/R heads which 
were only a bit more than freshening up my old heads.  They should be a 
bit better for performance as well.  If your engine is built up more, 
there are other heads that might be a better choice.  We left the cam 
and lifters as they were in good shape still.

Brad Waller
'67 Chevelle
'66 Corvette

Jim & Chris wrote:
> /I just found the problem .It seems the intake lifter on #7 must have 
> failed causing the push rod to bend like a slight "S" and break off . 
> so now I'm going to take the manifold off to retrieve the lifter and 
> bottom piece of the push rod and look for damage. is there anything 
> else I should do while I have it apart ie.change all the lifters and 
> pusrods ? Thanks again Guy's, Jimmy C./
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20070814/843ee884/attachment.html