[Chevelle-list] wiring harness

[Denny Shewmake]

I ran into simular problems when I replaced my wiring harness.   Trouble 
turned out to be a bent tab on the ignition switch connector (the one on top 
on the column under the dash). A tab was pushed up (or down) and not making 
connection.  Caused wired stuff.. Unless you can see physical damage or 
serious degredation on your harness (splices etc) I'd bet it is ok....Check 
all your connections and also make sure you have good (several) grounds..  
If you want to replace anyway,,  M&H makes good stuff.. Denny


>From: ken mabs <cmaplayer6 at yahoo.com>
>Reply-To: The Chevelle Mailing List <chevelle-list at chevelles.net>
>To: chevelle-list at chevelles.net
>Subject: [Chevelle-list] wiring harness
>Date: Tue, 3 Apr 2007 16:30:24 -0700 (PDT)
>
>I have a 70 malibu that has recently been restored, but i used the original 
>wiring harness.  After hooking everything back up the turn directionals, 
>dash lights, fuel pump, dome light, fuel gauge, etc. either short out or 
>stopped working completely.  Should I try and rebuild the harness myself 
>and retrace everything or just replace it?  Anyone have any info on an 
>inexpensive wiring harness?  Should I replace the whole thing or should i 
>just replace whats not working?  thanks guys.
>
>   Ken
>   Chicago
>   70 Malibu
>
>
>---------------------------------
>Don't get soaked.  Take a quick peek at the forecast
>  with theYahoo! Search weather shortcut.

_________________________________________________________________
Exercise your brain! Try Flexicon. 
http://games.msn.com/en/flexicon/default.htm?icid=flexicon_hmemailtaglineapril07