[Chevelle-list] ZBar Assembly

[Jim Buckingham]

Thanks  that is what mine shows, a seal on that side only with the washer.
 
Jim

  _____  

From: Chevelle-list-bounces at chevelles.net
[mailto:Chevelle-list-bounces at chevelles.net] On Behalf Of Dale
Sent: Friday, September 22, 2006 12:14 PM
To: jjabuck at msn.com; 'The Chevelle Mailing List'
Subject: Re: [Chevelle-list] ZBar Assembly



I have a 66, 67, and 69 AIM.  The 66 and 67 shows the seal the outer item on
bar, last piece before frame bracket; the 69 shows a washer between the seal
and frame bracket. Later years 'probably' used the extra metal washer to
protect the seal.  Can send a picture offline if you like.

 

Dale McIntosh

 <http://www.chevellecd.com> 1967 Chevelle Reference CD

ACES #1709/TC GOLD #92 <http://www.chevellecd.com> 

 

  _____  

From: Chevelle-list-bounces at chevelles.net
[mailto:Chevelle-list-bounces at chevelles.net] On Behalf Of Jim Buckingham
Sent: Friday, September 22, 2006 5:57 AM
To: 'The Chevelle Mailing List'
Subject: [Chevelle-list] ZBar Assembly

 

I am putting the ZBar in and wonder where the felt like washers go???  None
of the drawings I have show anything like that.

 

I know the two seals and spring clip go to hold the frame side pivot ball
in.  From there is jsut a guess.

 

Thanks,

 

Jim 

 

72 Chevelle Small Block

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20060922/bdb78797/attachment-0001.htm