[Chevelle-list] Best primer - frame/ suspension parts

[Wayne Kline]

Karl... I have use the EAST wood system a number of times. Their Rattle cans 
of both Rust encapsulator and chassis black go a long way per can.  They 
sell a  kit  of brush on primer and rattler can over coat will do a Chevelle 
frame. and control arms. The r chassis over coat is an Epoxy to it's pretty 
tuff stuff  as for the rust encapsulator ???? but they clam it's better then 
  POR-15

UMMV

Wayne



>From: "Karl Groves" <karl at karlcore.com>
>Reply-To: karl at karlcore.com,The Chevelle Mailing List 
><Chevelle-list at chevelles.net>
>To: "'The Chevelle Mailing List'" <Chevelle-list at chevelles.net>
>Subject: [Chevelle-list] Best primer - frame/ suspension parts
>Date: Thu, 7 Sep 2006 23:34:35 -0400
>
>With the rotisserie almost done, I'm within a week or two of taking my body
>off the frame.
>I plan on sanding/ sandblasting it down as well as removing, sanding/
>sandblasting all the suspension stuff as well.
>My question is, what sort of primer should I use on these parts?  Because 
>of
>where I am doing this (outside, not in an enclosed area), I'd prefer to use
>a rattle can, but if that's not going to yield good results, I'll do what I
>have to do (and I have a compressor and an HVLP gun).
>
>Anyone have any advice on this?
>
>
>Karl Groves
>Master Certified CIW
>http://www.karlcore.com
>
>Will Work For Parts:
>http://chevelle.karlcore.com/detail.php?id=3
>
>

_________________________________________________________________
Check the weather nationwide with MSN Search: Try it now!  
http://search.msn.com/results.aspx?q=weather&FORM=WLMTAG