[Chevelle-list] Best primer - frame/ suspension parts

[Clyde]

Powder coat the frame,any colour your little heart desires.If you are going 
to return the car to original,black is the best.Powder coating is really 
neat,it is really tough and looks great.
----- Original Message ----- 
From: "Karl Groves" <karl at karlcore.com>
To: "'The Chevelle Mailing List'" <Chevelle-list at chevelles.net>
Sent: Thursday, September 07, 2006 8:34 PM
Subject: [Chevelle-list] Best primer - frame/ suspension parts


> With the rotisserie almost done, I'm within a week or two of taking my 
> body
> off the frame.
> I plan on sanding/ sandblasting it down as well as removing, sanding/
> sandblasting all the suspension stuff as well.
> My question is, what sort of primer should I use on these parts?  Because 
> of
> where I am doing this (outside, not in an enclosed area), I'd prefer to 
> use
> a rattle can, but if that's not going to yield good results, I'll do what 
> I
> have to do (and I have a compressor and an HVLP gun).
>
> Anyone have any advice on this?
>
>
> Karl Groves
> Master Certified CIW
> http://www.karlcore.com
>
> Will Work For Parts:
> http://chevelle.karlcore.com/detail.php?id=3
>
>
>