[Chevelle-list] Best primer - frame/ suspension parts

[Karl Groves]

With the rotisserie almost done, I'm within a week or two of taking my body
off the frame.
I plan on sanding/ sandblasting it down as well as removing, sanding/
sandblasting all the suspension stuff as well. 
My question is, what sort of primer should I use on these parts?  Because of
where I am doing this (outside, not in an enclosed area), I'd prefer to use
a rattle can, but if that's not going to yield good results, I'll do what I
have to do (and I have a compressor and an HVLP gun).

Anyone have any advice on this?


Karl Groves
Master Certified CIW
http://www.karlcore.com 

Will Work For Parts:
http://chevelle.karlcore.com/detail.php?id=3