[Chevelle-list] Spindle

[Leo John Costigan]

Question, are you having the same problem with the lower ball joint on both 
sides?



Camaro lower ball joints will fit the lower control arm but have a larger 
and different taper. Same with lower ball joints that fit 'B' body. They are 
press in interference fit and some are threaded and screw into to lower 
control arm.



My thought is that what you received was miss packaged with the correct part 
number on the package.



If you got the correct part you should not have the problem you are having.



If you still have the old ball joints, test fit them in your spindles.



Leo

----- Original Message ----- 
From: "langus" <langus at mchsi.com>
To: "The Chevelle Mailing List" <chevelle-list at chevelles.net>
Sent: Friday, October 13, 2006 10:54 AM
Subject: Re: [Chevelle-list] Spindle


>I stuffed foam into all the ball joint/tierod end openings on the spindle 
>before I had them powdercoated and taped the threads on the spindle.  I 
>have tried to put the control arms onto the spindle with out having to 
>fumble with the springs but I just cannot get the spindle down on the lower 
>(the upper fits fine) ball joint.  I have checked that I have the right 
>lower ball joint, and even took my die grinder (gently) into the taper in 
>the spindle thinking maybe I just had a burr or something.  Still no go.  I 
>can get the castle nut down far enough the that top of the cotter hole is 
>just barly visible but not enough to get the cotter pin in.  Guess I will 
>just have to keep working at it.  The upper ball joints slide right through 
>nicely so I am not sure what happened.  Anyway,  thanks for all the 
>responses....You guys are great
>
>
> Ryan
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.427 / Virus Database: 268.13.3/474 - Release Date: 10/13/2006 
> 9:00 AM
>
>