[Chevelle-list] Spindle

[Jim H. Thompson]

I used big block springs and stock spindles. I set my bare frame up with
taller Nova spindles and factory disk brakes reusing the big block springs
also powder coated everything. All your matting surfaces must be bare metal.

-----Original Message-----
From: chevelle-list-bounces at chevelles.net
[mailto:chevelle-list-bounces at chevelles.net]On Behalf Of langus
Sent: Thursday, October 12, 2006 6:07 PM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] Spindle

I too am doing a frame off resto...  I checked with the auto store today and
they verified that I had the right lower ball joint (original spindle going
onto new MOOG lower and upper ball joints).  I know have some good ideas to
try tonight.  I found myself the other night with a hammer in my hand
thinking about convincing my newly powdercoated spindle on to my newly
powdercoated control arms that are attached to my newly powdercoated frame.
Needless to say I had to walk away.  Thats when I sent the email.  I will
try tonight to get them back on.  I have done coil springs before but for
some reason these are fighting me.

Ryan


Havinvg malibu spindles and putting BB coil springs wouldnt have anything to
do with it would it?  I have always thought they where the same spindles for
BB and SB cars.  Maybe not

Thanks again
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20061013/e8cc52dd/attachment.htm