[Chevelle-list] Spindle

[Rick Schaefer]

    Didn't see original message, so this may be redundant.  Are you using
stock spindle & ball joint?

On 10/11/06, Matthew Post <mpost at qualcomm.com> wrote:
>
> As someone else suggested, you need to get some weight on it.  Either by
> using your jack under the lower A-arm.  Or finish out the rest of the job,
> put the tire back on, and lower the car down.  Then you will be able to
> tighten the castle nut to spec.
>
> Hope this helps.
> -Matt
>
> At 03:58 PM 10/11/2006, langus wrote:
>
> Jim
> I couldnt even get the nut on far enough to get the cotter pin in before
> the nut was bottomed out.  I havent had a chance to fight with it yet so I
> am still working on the solution.....
>
>
> Ryan
>
>


-- 
Rick Schaefer
72 TPI El Camino
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20061012/67709a4c/attachment.htm