[Chevelle-list] Proportioning Valve Help

[Larry Shouse]

Thanks Again!
  -----Original Message-----
  From: chevelle-list-bounces at chevelles.net
[mailto:chevelle-list-bounces at chevelles.net]On Behalf Of Rick Schaefer
  Sent: Sunday, November 05, 2006 8:29 PM
  To: The Chevelle Mailing List
  Subject: Re: [Chevelle-list] Proportioning Valve Help


    I have that valve on m my 72 as a replacement for the stock valve.  It
will mount in the original location & use stock lines - at least on 72.
 BTW - Stock location is on inside of frame rail directly beneath th emaster
cylinder.


  On 11/5/06, Larry Shouse <lpshouse at fuglybrothers.com> wrote:
    Thanks. I'll be looking forward to seeing the tonight after I get back
from the coast...

    Larry Shouse
      -----Original Message-----
      From: chevelle-list-bounces at chevelles.net
[mailto:chevelle-list-bounces at chevelles.net]On Behalf Of
Bad66Chevelle454 at aol.com
      Sent: Sunday, November 05, 2006 1:18 PM
      To: chevelle-list at chevelles.net
      Subject: Re: [Chevelle-list] Proportioning Valve Help


      Larry,

      Ill snap some pictures today for yah. Mines right underneath the
master cylinder, held up by the lines. However I hear this is bad, because
of the p-valve jumping around, over time the lines will crack. There is a L
bracket that mounts right there, that you can actually bolt the p-valve to
also. Or you could always mount it low on the frame, which is what they did
stock. Once my camera batteries charge up I will send you some pictures!



  --
  Rick Schaefer
  72 TPI El Camino

-------------- next part --------------
An HTML attachment was scrubbed...
URL: /pipermail/chevelle-list_chevelles.net/attachments/20061105/1bfe8225/attachment.html