[Chevelle-list] Proportioning Valve Help

[Rick Schaefer]

  I have that valve on m my 72 as a replacement for the stock valve.  It
will mount in the original location & use stock lines - at least on 72.  BTW
- Stock location is on inside of frame rail directly beneath th emaster
cylinder.

On 11/5/06, Larry Shouse <lpshouse at fuglybrothers.com> wrote:
>
>  Thanks. I'll be looking forward to seeing the tonight after I get back
> from the coast...
>
> Larry Shouse
>
> -----Original Message-----
> *From:* chevelle-list-bounces at chevelles.net [mailto:
> chevelle-list-bounces at chevelles.net]*On Behalf Of *
> Bad66Chevelle454 at aol.com
> *Sent:* Sunday, November 05, 2006 1:18 PM
> *To:* chevelle-list at chevelles.net
> *Subject:* Re: [Chevelle-list] Proportioning Valve Help
>
>  Larry,
>
> Ill snap some pictures today for yah. Mines right underneath the master
> cylinder, held up by the lines. However I hear this is bad, because of the
> p-valve jumping around, over time the lines will crack. There is a L bracket
> that mounts right there, that you can actually bolt the p-valve to also. Or
> you could always mount it low on the frame, which is what they did stock.
> Once my camera batteries charge up I will send you some pictures!
>
>


-- 
Rick Schaefer
72 TPI El Camino
-------------- next part --------------
An HTML attachment was scrubbed...
URL: /pipermail/chevelle-list_chevelles.net/attachments/20061105/c084beff/attachment.html