[Chevelle-list] Fw: Torque

[Dale]

I'm sure GM has torque specs somewhere but don't know of anyone who did more
than simply snug down the bolts with a little Loctite.

 

Dale McIntosh 
 <http://www.chevellecd.com/> 1967 Chevelle Reference CD! 
http://www.chevellecd.com 
ACES #1709/TC Gold #92 

  _____  

From: Chevelle-list-bounces at chevelles.net
[mailto:Chevelle-list-bounces at chevelles.net] On Behalf Of Jimmy C.
Sent: Sunday, July 02, 2006 2:41 PM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] Fw: Torque

 

Thanks Dale, I had the flywheel to crank specs but was looking for pressure
plate to flywheel which Centerforce says to follow manufactures torque
specs. which I could not find.  If I cant get them by tomorrow I am going to
go with the one you sent and have printed the Hays install directions for
reference. Can you suggest any torque specs. for bellhousing to block and
transmission to bellhousing ?I appreciate your time and help. thanks again,
Jimmy C.

----- Original Message ----- 

From: Dale <mailto:dale at dalesplace.com>  

To: 'The <mailto:Chevelle-list at chevelles.net>  Chevelle Mailing List' 

Sent: Sunday, July 02, 2006 11:44 AM

Subject: Re: [Chevelle-list] Fw: Torque

 

I found flywheel to crankshaft specs in my Chiltons and they're 55-65 for
283-396 (64-71) and 85-95 for 402-454 (70-71).    Hays instruction sheet
(http://go.mrgasket.com/pdf/Clutch_Flywheel.pdf) says:

Flywheel:

7/16-20x1" ~ 70-80 ft. lbs

1/2-20x1" ~ 100-110 ft. lbs.

1/2-20x3/4" ~ 100-110 ft. lbs

 

Pressure Plate:

5/16" ~ 25-30 ft. lbs.

3/8" ~ 30-40 ft. lbs.

 

Other good information such as adjustment info on that two-page flier,
suggest you download/print it.

 

Dale McIntosh 
 <http://www.chevellecd.com/> 1967 Chevelle Reference CD! 
http://www.chevellecd.com 
ACES #1709/TC Gold #92 


  _____  


From: Chevelle-list-bounces at chevelles.net
[mailto:Chevelle-list-bounces at chevelles.net] On Behalf Of Jimmy C.
Sent: Sunday, July 02, 2006 9:29 AM
To: Chevelle Forum
Subject: [Chevelle-list] Fw: Torque

 

 

----- Original Message ----- 

From: Jimmy C. <mailto:colgan at warwick.net>  

To: Chevelle <mailto:Chevelle-list at Chevelles.net>  Forum 

Sent: Sunday, July 02, 2006 10:24 AM

Subject: Torque

 

I am in the process of replacing my stock clutch with a Centerforce Dual
friction and would like to know what the torque should be for the pressure
plate to flywheel, bellhousing to motor and tranmisssion to bell housing. I
looked in the Hayes and both Chilton/ Chiltons professional editions and
could not find the above torque values  am I missing somthing ? Thanks for
any help or direction, Jimmy C.    P.S Have a Happy and safe 4th of July !
Lets Go Red, White and Blue ! 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20060702/3ac9aec6/attachment.htm