[Chevelle-list] Power Steering Box

[Rick Schaefer]

Fittings will cost about $20.00 shipped to your door, new hose will be more,
but if you ever change the box again you won't need to get another set of
fittings.

The " $20.00 fittings"  are inserts that are pushed into the steering box
hydraulic fittings,  they add a flared seat to the o-ring style box.  .
Then the original hose screws in tightly and its flare seats on the adapters
flared seat.    The fittings are NOT an adapter that you screw into the box
then screw the hose into it.  Just trying to clarify that if you are not
aware.  I thought that I had a picture but can't find it right now.


On 8/15/06, Devin <hotrod64chevy at sbcglobal.net> wrote:
>
>  You may be able to have a line made up for you.  I know of a local parts
> house that can make up a line with any fitting you may need.
>
> Devin
>
>  ----- Original Message -----
> *From:* Crazy Rusty <rusty at crazyrusty.com>
> *To:* 'The Chevelle Mailing List' <Chevelle-list at chevelles.net>
>  *Sent:* Monday, August 14, 2006 6:59 PM
> *Subject:* Re: [Chevelle-list] Power Steering Box
>
>
>
> I am using a later box and that definitely seems to be the issue.  Instead
> of an adapter, can't I just buy the fittings and the 6" hard line?  I
> thought that would be easier but then again, I can't seem to find them
> anywhere J
>
>
>
> - JB
>
>
>  ------------------------------
>
> *From:* Chevelle-list-bounces at chevelles.net [mailto:
> Chevelle-list-bounces at chevelles.net] *On Behalf Of *Rick Schaefer
> *Sent:* Thursday, August 10, 2006 10:46 PM
> *To:* The Chevelle Mailing List
> *Subject:* Re: [Chevelle-list] Power Steering Box
>
>
>
> OOps
>
>   Early P/S boxes did not have o-rings.   Later ones did.  The early hoses
> have a flare fitting on the end that mates to a flare in the box coupling.
>
>
>
>
> IF you are using a later box that used o-rings, you can buy adapters that
> allow the use of early non o-ring hoses.
>
>
>
> On 8/11/06, *Rick Schaefer* <rickas at gmail.com> wrote:
>
> E
>
>
>
> On 8/10/06, *Mike Holleman* <mholleman at ec.rr.com > wrote:
>
> Most of the fittings in PS boxes use o'rings. Also later boxes have metric
> threads. one 18 x 1.5 and one 16 x 1.5.
>
> Mike
>
> ----- Original Message -----
>
> *From:* Crazy Rusty <rusty at crazyrusty.com>
>
> *To:* 'The Chevelle Mailing List' <Chevelle-list at chevelles.net>
>
> *Sent:* Thursday, August 10, 2006 6:20 PM
>
> *Subject:* [Chevelle-list] Power Steering Box
>
>
>
>
> Hey Everyone,
>
>             I just put on a new (used) steering box on my Chevelle but
> I've found that after screwing the two lines in, they move around even
> though the bolts are tight.  Is there supposed to be some sort of grommet in
> there?  With the lines loose, the fluid just comes right out (of course).
> Any ideas?
>
>
>
> Thanks!
>
> JB
>
> 69 Chevelle
>  ------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.10.8/415 - Release Date: 8/9/2006
>
>
>
>
>
>  --
> Rick Schaefer
> 72 TPI El Camino
>
>
>
>
> --
> Rick Schaefer
> 72 TPI El Camino
>
>


-- 
Rick Schaefer
72 TPI El Camino
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20060815/14b1f753/attachment-0001.htm