[Chevelle-list] Power Steering Box

[Rick Schaefer]

OOps
  Early P/S boxes did not have o-rings.   Later ones did.  The early hoses
have a flare fitting on the end that mates to a flare in the box coupling.


IF you are using a later box that used o-rings, you can buy adapters that
allow the use of early non o-ring hoses.


On 8/11/06, Rick Schaefer <rickas at gmail.com> wrote:
>
> E
>
>
> On 8/10/06, Mike Holleman <mholleman at ec.rr.com> wrote:
> >
> >  Most of the fittings in PS boxes use o'rings. Also later boxes have
> > metric threads. one 18 x 1.5 and one 16 x 1.5.
> > Mike
> >
> >  ----- Original Message -----
> > *From:* Crazy Rusty <rusty at crazyrusty.com>
> > *To:* 'The Chevelle Mailing List' <Chevelle-list at chevelles.net>
> > *Sent:* Thursday, August 10, 2006 6:20 PM
> > *Subject:* [Chevelle-list] Power Steering Box
> >
> >
> >
> > Hey Everyone,
> >
> >             I just put on a new (used) steering box on my Chevelle but
> > I've found that after screwing the two lines in, they move around even
> > though the bolts are tight.  Is there supposed to be some sort of grommet in
> > there?  With the lines loose, the fluid just comes right out (of course).
> > Any ideas?
> >
> >
> >
> > Thanks!
> >
> > JB
> >
> > 69 Chevelle
> >
> > ------------------------------
> >
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.1.405 / Virus Database: 268.10.8/415 - Release Date: 8/9/2006
> >
> >
>
>
> --
> Rick Schaefer
> 72 TPI El Camino
>
>


-- 
Rick Schaefer
72 TPI El Camino
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://chevelles.net/pipermail/chevelle-list_chevelles.net/attachments/20060811/6ba9d7f2/attachment.htm